Image link

EnoSense® LUX light sensor for measuring brightness

Our new sensor works with an internal battery for use in any ambient light situation. The EnoSense® LUX sends its current measured value every 15 minutes, and even every minute if there is a change. In its stylish design housing, it fits unobtrusively on any wall and is only 81 x 41 x 9 mm in size.

Precise and reliable

The measured values at a glance

The EnoSense® LUX provides the following measured values with each telegram:

Brightness
Brightness
Measuring range: 1 lx … 60,000 lx Accuracy: +/- 10 %
Every 60 seconds

The measured values

The sensor delivers new measured values every minute with an accuracy of ± 10 % of the measuring range end value. With a transmission interval of 15 minutes at a constant measured value, you can always keep an eye on the sensor and your building.
Screenshot DolphinView

The EnoSense® LUX measures the ambient light that illuminates the device. The sensor used measures the light with a spectral sensitivity that is very close to that of the human eye and has very good infrared suppression.

Avoid incorrect measurements

Adjusted spectral sensitivity

The EnoSense® LUX measures the ambient light that illuminates the device. The sensor used measures the light with a spectral sensitivity that is very close to that of the human eye and has very good infrared suppression.
Screenshot DolphinView

The spectral sensitivity of the EnoSense® LUX light sensor compared to that of the human eye.

By day and by night

Long service life with battery (>5 years)

The EnoSense LUX light sensor has an internal CR2032 battery for trouble-free operation day and night, in any room at any time.

Deliberate use of a battery for trouble-free operation in all situations.
Already equipped with 1 CR2032 battery ex works.
Screenshot DolphinView
Service & maintenance

The energy data

For significantly improved diagnosis and maintenance of the system, the EnoSense LUX sends the battery status with every 10th data telegram via a so-called signal telegram (ORG 0x09). This means that the battery voltage is continuously available for monitoring and maintenance. This makes it easy to plan maintenance cycles.

Selectable data format

Selectable data format

The EnoSense LUX uses one of three possible standard device profiles or EEPs. This can be selected using the service button.
A5-06-01 Sensor for light measurement, 300 lx to 60,000 lx (default)
A5-06-03 Sensor for light measurement, 0 lx to 1,000 lx, resolution 1 lx
A5-06-03 Sensor for light measurement, 0 lx to 1,000 lx, resolution 1 lx

Schnittstelle Funk / Wireless interface / Interface radio

EnOcean

EU: 868,3 MHz

FCC: 902 MHz

Weitere Schnittstellen / Other interfaces / Autres interfaces

Service-LED / Service LED / LED de service

Servicetaster / Service button / Bouton de service

Sensorik / Sensors / Capteurs

Helligkeit / Brightness / Luminosité

Spannungsversorgung / Power supply / Alimentation électrique

1x Batterie CR2032 / 1x battery CR2032

Umgebungsbedingungen / Environmental conditions / Conditions environnementales

Betriebstemperatur / Operating temp. / Température d'utilisation:
0 °C .. +60 °C

Lagertemperatur / Storage temp. / Température de stockage:
-20 °C .. +70 °C

Luftfeuchtigkeit / rel. humidity / Humidité de l'air:
0 .. 95 %

(nicht kondensierend / non condens. / sans condensation)

Schutzklasse / Protection class / Classe de protection
: IP20

Abmessungen und Gewicht / Dimensions and weight / Dimensions et poids

Breite / Width / Largeur:  41 mm

Länge / Length / Longueur:  81 mm

Höhe / Height / Hauteur: 9 mm

Gewicht / Weight / Poids: 15 g

Zubehör / Accesories / Accessoires

Doppelseitiges Klebepad / Double-sided adhesive pad / Ruban adhésif double face

DolphinView / Softwaretool EnOcean GmbH

Hinweis:

Sie gelangen auf die Seite des Herstellers und müssen sich dort für den Download registrieren.

Note:

You will be taken to the manufacturer's website where you must register for the download.

Vorschau

Preview

Datei

File

Wireless EnOcean Sensor EnoSense® LUX, frontseitig im weissen Gehäuse

The following devices / options are currently available from us:

Bestellnummer

Order number

Artikelbezeichnung

Article name

Zulassung

Approval

12836

AL-443-00-868 EnoSense LUX white / CE (868,3 MHz)

CE

12837

AL-443-00-902 EnoSense LUX white / FCC (902 MHz)

FCC