1. Lighting solution with manual control
We had to figure out that quite often it seems to be very difficult for a customer to select the right products from the broad market.
At the end, it is a hard job for an installer to configure all these devices to have, at the end, a working solution for a satisfied customer.
Many times, you will find out too late that electronic devices have the wrong interface, components are missing, or devices have already been damaged since you have not been able to test them in advance.
To provide you instead with an out-of-the-box solution, we put everything together in one place for a system with manual or even automatic control for color temperature and brightness.
Realize projects with tunable white luminaires (cold / warm white), and avoid any risk by selectin non-matching products.
1. Select a Controller:
Differences:
1. Housing
2. Maximum supported LED panels:
BL-201… = max. 15 pcs.
BL-202… = max. 17 pcs.
BL-201-40-868 UP
TUNABLE WHITE
part nr. 11968
BL-202-40-868 EVG
TUNABLE WHITE
part nr. 11660
2. Select LED Panel(s):
Square: 621 x 621 mm
Rectangle: 1.195 x 295 mm
LED PANEL SET SQUARE V1
40W TUNABLE DALI DT8 4000lm
part nr. 12231
LED PANEL SET RECT V1
36W TUNABLE DALI DT8 3600lm
part nr. 12232
3. Select mouting frame:
Für Quadrat: 621 x 621 mm
Für Rechteck: 1.195 x 295 mm
MOUNTING SET
LED PANEL SQUARE V1
part nr. 12233
MOUNTING SET
LED PANEL SQUARE V1
part nr. 12234
4. Select light switch:
Basically, any double rocker based on EnOcean standard will work!
5. Almost finished!
You only have to connect the devices, and teach in the light switch(es) as shown in the video.
Commissioning example
Technical data, ordering information, downloads etc.
Technical data
LED Panel squared
– Power consumption: 40 W
– Lumen output: 4.000 lm
– Color temperature: 3.000 – 6.000 K
– Material / color of frame: Aluminium / white
– Lifetime: 40.000 h L80 B10
– CRI: 90
– Angle: 120°
– Outer dimensions (frame): 621 x 621 mm
LED Panel rectangular
– Power consumption: 36 W
– Lumen output: 3.600 lm
– Color temperature: 3.000 – 6.000 K
– Material / color of frame: Aluminium / white
– Lifetime: 40.000 h L80 B10
– CRI: 90
– Angle: 120°
– Outer dimensions (frame): 1.195 x 295 mm
LED driver / DALI DT8
– Supply voltage: 200 – 240 V AC
– Power consumption: 50 W
– Frequency: 50/60 Hz
– Protection class: IP20
– Efficiency: typ 87% @ 230 V AC
– Output: max. 700 mA / max. 48 V DC, pre-configured to match the LED-Panel
– Dimensions: 210 x 50 x 32 mm
– Standards:
EN 55015; EN 61000-3-2 ; EN 61000-3-3
EN 61547
EN 61000-4-2; EN 61000-4-4; EN 61000-4-5
EN 61000-4-6; EN 61000-4-8; EN 61000-4-11;
Downloads

>DOWNLOAD<
382.55 KB

>DOWNLOAD<
230.82 KB
Ordering information
Controller:
Option 1 / up to 17 LED Panels / in-wall housing:
Part name
BL-201-40-868 UP TUNABLE WHITE
Part number
11968
Part description
EnOcean-DALI-Controller series BL-201
function: 1x TUNABLE WHITE (DALI DT8) on double rocker,
rocker A: ON/OFF/DIM, rocker B: color temp.,
230 V AC, 868 MHz, in-wall housing
Option 2 / up to 15 LED-Panels / EVG housing:
Part name
BL-202-40-868 EVG TUNABLE WHITE
Part number
11660
Part description
EnOcean-DALI-Controller series BL-202
function: 1x TUNABLE WHITE (DALI DT8) on double rocker,
rocker A: ON/OFF/DIM, rocker B: color temp.,
230 V AC, 868 MHz, EVG housing
LED Panel incl. ballast / electronic driver:
Option 1)
Part name
LED PANEL SET SQUARE V1
40W TUNABLE DALI DT8 4000lm
Part number
12231
Part description
LED panel set including LED driver
DALI DT8, 230 V AC
squared, 621 x 621 mm
Option 2)
Part name
LED PANEL SET RECT V1
36W TUNABLE DALI DT8 3600lm
Part number
12232
Part description
LED panel set including LED driver
DALI DT8, 230 V AC
rectangular, 1195 x 295 mm
Mounting frame:
Option 1)
Part name
MOUNTING SET LED PANEL SQUARE V1
Part number
12233
Part description
Mounting frame for LED panel squared (621 x 621 mm)
Option 2)
Part name
MOUNTING SET LED PANEL RECT V1
Part number
12234
Part description
Mounting frame for LED rectangular (1195 x 295 mm)
2. Lighting solution with automatic control function
A very cost-efficient and powerful control solution is based on our smallest touch control panel VL-704 SMART. You have the choice to control brightness and color manually using the touch display, or fully automatic based on the local real-time clock (DALI DT8).
The VL-704 SMART will send the desired color temperature and brigthness level to the EnnOcean-DALI-Controller of type BL-201-10-868 UP FLEX or BL-204-10-868 EVG FLEX via an EnOcean-USB-Stick, connected to the USB port of the control panel.
In addition, you can teach in an EnOcean light switch with a single rocker to switch on and off the LED panels. The VL-704 SMART will receive the data telegrams from the light switch and will switch the LED Panels accordingly.
The following graphics show the standard color temperatures depending on time of the day and season. The fade time between two colors can be setup by the user very easily.
1. The touch control panel:
VL-704 SMART
part nr. 11843
TUNABLE WHITE and HCL service package 1
part nr. 12236
2. Select a controller:
Differences:
1. Housing
2. Maximum supported LED panels:
BL-201… = max. 15 pcs.
BL-202… = max. 17 pcs.
BL-201-10-868 UP FLEX
part nr. 11214
BL-204-10-868 EVG FLEX
part nr. 12136
3. Select LED Panel(s):
Square: 621 x 621 mm
Rectangle: 1.195 x 295 mm
LED PANEL SET SQUARE V1
40W TUNABLE DALI DT8 4000lm
part nr. 12231
LED PANEL SET RECT V1
36W TUNABLE DALI DT8 3600lm
part nr. 12232
4. Select mounting frame:
For square: 621 x 621 mm
For rectangle: 1.195 x 295 mm
MOUNTING SET
LED PANEL SQUARE V1
part nr. 12233
MOUNTING SET
LED PANEL SQUARE V1
part nr. 12234
5. Select additional light switch for ON/OFF (Option):
Basically any EnOcean light switch (single rocker) will work!
6. Almost done!
You only have to connect the devices, and teach in the light switch(es) as shown in the video.
Commissioning example
Following video shows the VL-704 SMART with our HCL automatic application in version 12.
In this demo, the control panel communicates with the BL-201-10-868 EVG FLEX via an EnOcean USB stick attached to its USB port.
The application supports manual control, and a full automatic mode as well. In automatic mode, color temperature is calculated based on time of day and season.
In manual mode, color can be changed using 4 touch buttons. The corresponding color values can be changed by the user in the setup menu.
With the +/- buttons on the right side, color can be changed seamless. Brightness can be changed as well.
In addition, an EnOcean light switch can be teached in. It has the same function as the ON / OFF buttons on the touch screen.
You only have to enter and confirm the EnOcean ID of the switch in the SETUP menu (hold the DC logo for 5 seconds).
Simply watch the following short video:
Technical data, ordering information, downloads etc.
Technical data
LED Panel squared
– Power consumption: 40 W
– Lumen output: 4.000 lm
– Color temp.: 3.000 – 6.000 K
– Material / color frame: Aluminium / white
– Lifetime: 40.000 h L80 B10
– CRI: 90
– Angle: 120°
– Dimensions frame: 621 x 621 mm
LED Panel rectangular
– Power consumption: 36 W
– Lumen output: 3.600 lm
– Color temp: 3.000 – 6.000 K
– Material / color frame: Aluminium / white
– Lifetime: 40.000 h L80 B10
– CRI: 90
– Angle: 120°
– Dimensions frame: 1.195 x 295 mm
LED driver / DALI DT8
– Supply voltage: 200 – 240 V AC
– Power consumption: 50 W
– Frequency: 50/60 Hz
– Protection class: IP20
– Effiziency: typ 87% @ 230 V AC
– Output: max. 700 mA / max. 48 V DC, preconfigured for selected LED panel
– Dimensions: 210 x 50 x 32 mm
– Standards:
EN 55015; EN 61000-3-2 ; EN 61000-3-3
EN 61547
EN 61000-4-2; EN 61000-4-4; EN 61000-4-5
EN 61000-4-6; EN 61000-4-8; EN 61000-4-11;
Downloads

>DOWNLOAD<
382.55 KB

>DOWNLOAD<
230.82 KB
Ordering information
Touch control panel:
Part name
VL-704 SMART
Part number
11843
Part description
HMI with 4.3″ TFT, 480×272 pixel,64K colours, LED background lighting, dimmable, 2 GB Flash, 256 MB RAM, ARM Cortex-A8 Single Core 300 MHz, Linux 3.12, 1x Ethernet Port 10/100, 1x USB Host (2.0), 1x serial, 1x SD slot, 24V DC, 0.25A, front IP66, rear IP20, resistive touchscreen, foil, operating temp: 0°C to +50°C, with jMobile-Runtime, dimensions: front 147×107 mm, cutout 136×96 mm
Service Package:
Part name
TUNABLE WHITE and HCL service package 1
Part number
12236
Part description
Service Package, including EnOcean USB-Stick, application TUNABLE WHITE and HCL, Setup of Software on VL-704 STYLE and selected EnOcean-DALI-Controller, tested and ready to use
Controller:
Option 1 / up to 17 LED Panels / in-wall housing:
Part name
BL-201-40-868 UP TUNABLE WHITE
Part number
11968
Part description
EnOcean-DALI-Controller series BL-201
function: 1x TUNABLE WHITE (DALI DT8) on double rocker,
rocker A: ON/OFF/DIM, rocker B: color temp.,
230 V AC, 868 MHz, in-wall housing
Option 2 / up to 15 LED-Panels / EVG housing:
Part name
BL-202-40-868 EVG TUNABLE WHITE
Part number
11660
Part description
EnOcean-DALI-Controller series BL-202
function: 1x TUNABLE WHITE (DALI DT8) on double rocker,
rocker A: ON/OFF/DIM, rocker B: color temp.,
230 V AC, 868 MHz, EVG housing
LED Panel incl. ballast / electronic driver:
Option 1)
Part name
LED PANEL SET SQUARE V1
40W TUNABLE DALI DT8 4000lm
Part number
12231
Part description
LED panel set including LED driver
DALI DT8, 230 V AC
squared, 621 x 621 mm
Option 2)
Part name
LED PANEL SET RECT V1
36W TUNABLE DALI DT8 3600lm
Part number
12232
Part description
LED panel set including LED driver
DALI DT8, 230 V AC
rectangular, 1195 x 295 mm
Mounting frame:
Option 1)
Part name
MOUNTING SET LED PANEL SQUARE V1
Part number
12233
Part description
Mounting frame for LED panel squared (621 x 621 mm)
Option 2)
Part name
MOUNTING SET LED PANEL RECT V1
Part number
12234
Part description
Mounting frame for LED rectangular (1195 x 295 mm)