The basic function – CO2 traffic light as a desktop or wall-mounted device
The integrated CO2 sensor in the EnoPuck CO2 continuously measures the CO2 content of the ambient air.
- If the measured value is below the limit values, the EnoPuck CO2 lights up green continuously.
- If the value of level 1 is exceeded, the color changes to yellow.
- If the value of level 2 is exceeded, the EnoPuck CO2 lights up in a strong red.
Levels 1 and 2 are preset at the factory, but can be set with our BL-PC-FLEX-2 software depending on the application.
Added value through integrated sensors – use in smart spaces
The EnoPuck CO2 has a large number of sensors, which make it particularly interesting for use in smart spaces beyond its function as a CO2 traffic light. Here are all the sensors in brief:
• CO2: 0 – 10,000 ppm
• Temperature: 0 – 50 ° C
• Humidity: 0 – 100%
In addition to the CO2 concentration, evaluate the air quality by additionally reading the measured values of the humidity and air temperature from the EnoPuck CO2.
• PIR sensor: 100 degree opening angle, range 3 to 5 meters
• Vibration: sensitivity 0.061 g
Use the evaluation of the integrated acceleration sensor for your room booking system. When it is set up on a table, the highly sensitive acceleration sensor detects shocks and vibrations at the place of installation. In this way you can see whether the working place is actually occupied or whether it is available despite being booked.
If the EnoPuck CO2 is wall-mounted, you can evaluate the signal from the motion detector (PIR) integrated in the top of the housing. With an opening angle of 100 degrees and a range of up to 5 meters, it reliably detects movements of people in the room.
• Brightness: 0 – 64,000 lux
Adjust the luminaires brightness at the workplace dynamically by using the measured value of the integrated brightness sensor. Our EnOcean-DALI-controllers, for example, are available for this purpose.
The measured values / data are transmitted in the following standardized format:
Wireless configuration with EnOcean USB stick and PC software BL-PC-FLEX-2
Just like all of our FLEX controllers, you can easily configure the EnoPuck CO2 using the easy-to-use PC software BL-PC-FLEX-2. You can teach-in sensors with RPS telegrams (light switches, buttons and window contacts), e.g. to reset a time-controlled red LED only when the window has actually been opened.
Together with the 16 timers of the EnoPuck CO2, you can easily implement this type of time-controlled traffic light function.
Easiest assembly and commissioning
The EnoPuck CO2 is supplied with 12 V DC via the included plug-in power supply unit.
It can either be set up on a flat surface as a tabletop device or used hanging on the wall.