The basic function – colored LED sign as table or wall unit
Without its own integrated CO2 sensors, the EnoPuck can be taught-in as a sister display to the CO2 sensor of the EnoPuck CO2.
Since these are standardized telegrams according to EEP, devices from third-party providers will of course also work.
Added value through integrated sensors – use in smart spaces
The EnoPuck has a large number of sensors which, in addition to its function as a colored LED display, make it particularly interesting for use in smart spaces. Here are all the sensors in brief:
• Temperature: 0 – 50 ° C
• Humidity: 0 – 100%
Evaluate the measured values of the rel. Evaluate humidity and air temperature.
• PIR sensor: 100 degree opening angle, range 3 to 5 meters
• Vibration: sensitivity 0.061 g
Use the evaluation of the integrated acceleration sensor for your room booking system. When it is set up on a table, the highly sensitive acceleration sensor detects shocks and vibrations at the place of installation. In this way you can see whether the workstation is actually occupied or whether it is available despite being booked.
If you are wall-mounted, you can evaluate the signal from the motion detector (PIR) integrated in the top. With an opening angle of 100 degrees and a range of up to 5 meters, it reliably detects movements of people in the room.
• Brightness: 0 – 64,000 lux
Adjust the brightness at the workplace dynamically by using the measured value of the integrated brightness sensor. Our EnOcean DALI controllers, for example, are available for this purpose.
The measured values / data are transmitted in the following standardized format:
Wireless configuration with EnOcean USB stick and PC software BL-PC-FLEX-2
Just like the EnoPuck CO2 and all of our FLEX controllers, you can easily configure the EnoPuck using the easy-to-use PC software BL-PC-FLEX-2. You can teach-in sensors with RPS telegrams (light switches, buttons and window contacts), e.g. to reset a time-controlled red display only when the window has actually been opened.
Together with the 16 timers of the EnoPuck, you can easily implement this type of time-controlled traffic light function.
Easiest assembly and commissioning
As with the EnoPuck CO2, the EnoPuck is supplied with 12 V DC via the included plug-in power supply unit.
The EnoPuck can either be set up on a flat surface as a tabletop device or used hanging on the wall.
Technical data, order information, downloads, etc.